When La Marzocco set out to design a new commercial espresso grinder, we knew there would be challenges. We also knew that starting from the ground up would have its advantages, too. By establishing clear goals and benchmarks for performance, La Marzocco was able to reimagine what was possible in both form and function. With that, we’d like to introduce you to our brand-new flagship espresso grinder: the Swan. With an anti-static system, almost zero retention, belt-driven burrs for reduced heat build-up, and an advanced motor, the Swan presents espresso grinding in a way that’s never been seen before.
static-free grinding
The core of the Swan is built around an anti-static system that uses an electrical charge to remove static electricity from the ground coffee. When coffee picks up a static charge during grinding, it tends to cling to surfaces and spray everywhere around the counter. Most espresso grinders combat static charge by pushing the coffee through a chute or a flap, but this causes the clumping. With the Swan’s anti-static system, the coffee can fall freely into the portafilter in a light, fluffy pile.
zero retention espresso grinding
The design of the Swan flips how the burrs are arranged, eliminating the need for an internal grinding chute and allowing the coffee to fall directly from the burr set. This creates minimal ground coffee retention, creating less waste and quicker grind adjustments. The anti-static system keeps the coffee flowing smoothly without any clumping, leading to more accurate programmed doses and less counter mess.
dose-by-revolution
The Swan uses an advanced motor controller that’s able to maintain a constant burr speed, even as the coffee moving through the burrs creates resistance. The sensor that monitors burr speed is also able to track the number of burr rotations, creating a new metric for programming your dose. By using burr rotations instead of time, the Swan’s programmable buttons deliver higher consistency from dose to dose. Combined with the offset-belt driven motor to reduce heat build-up, the direct-to-portafilter grinding chute, and an anti-static system, the Swan offers unparalleled consistency—even in high-volume environments.
precise grind adjustments
Burr adjustment is handled by a pair of ambidextrous dials located on both sides of the hopper so that everyone has easy access. Even more important, however, is the indirect burr-adjustment system. By utilizing a continuous indirect worm screw to move burrs closer and further apart, the Swan’s adjustment dial offers more precision than direct collar adjustment espresso grinders. This allows the barista access to ultimate fine-tuning when dialing in their espresso.
familiar design
Since La Marzocco completely reimagined how the inside of an espresso grinder could operate, we were also able to update the exterior design as well. The Swan pulls lines and design elements from the entire La Marzocco espresso machine lineup while featuring the same three-button system on the KB90, Linea PB, and Modbar AV. Its shape pairs beautifully with any La Marzocco espresso machine, creating a more coherent aesthetic for your counters.
learn more
Reach out to find your local La Marzocco sales representative here, or visit the Swan’s webpage to learn more. You can also browse our full Product Catalog here.
